Webbyt
Webbyt
Webbyt
Webbyt
Webbyt
Webbyt
Webbyt
Webbyt
Webbyt
Webbyt
 
 
EST
Webbyt
FIN
Webbyt
ENG

Webbyt SIIDI- & TAMPOTRÜKIMATERJALID
Webbyt
Webbyt KILEMATERJALID
Webbyt
Webbyt COVER STYL´ SISUSTUSKILE-MÖÖBLIKILE-DEKORATIIVKILE
Webbyt
Webbyt KLAASIKILED
Webbyt
Webbyt PRINDIMATERJALID
Webbyt
Webbyt KUUMPRESSKILED
Webbyt
Webbyt ERIOTSTARBELISED KLEEBISMATERJALID
Webbyt
Webbyt PÄIKESEKAITSEKARDINAD
Webbyt
Webbyt PLASTIKUD
Webbyt
Webbyt KINNITUSDETAILID
Webbyt
Webbyt ABIVAHENDID
Webbyt
Webbyt
STEINEL KUUMAÕHUFÖÖNID
Webbyt
TEIBID
Webbyt
Webbyt VÄRVIKAARDID PANTONE & RAL
Webbyt
Webbyt 3D POLÜURETAANID
Webbyt
Webbyt MAGNETMATERJALID
Webbyt
Webbyt HESKINS LIBISEMISVASTASED TEIPID
Webbyt
Webbyt SEADMED

 



FELT ROLL ALCANTARA FOR WET APPLICATION

Webbyt
  Print Prindi
Webbyt
 

FELT ROLL ALCANTARA

 

FELT ROLL ALCANTARA size: 2,5cm

 
For wer application !
 

This orange felt tape is used to cover the edges of car vinyl wrapping tools like Bondo cards or titnting hard card squeegees. It is the replacement wool felt of Magnetic Bondo card, Pump Cards. Tinters can also use this 3M pre-cut felt tape as window guide tape to reduce or eliminate window films scratches which caused when the window moves up and down across the guide. Installing this felt on the surface of the window guide helps reduce or eliminate these scratches. It perfectly matches with Bondo Card

How To Do It ?

The solution to a scratch free vinyl installation is fairly simple. Need a good quality squeegee with a buffer and some soapy water.  A microfiber squeegee works well or a soft felt edge squeegee does the same job too.  You can also create your own buffer by gluing felt or other materials to a regular squeegee; just do some testing first to ensure it won’t scratch the film.

The trick to avoid scratches is a “Top Wet Application” application method. Kind of like a reverse wet application; because instead of putting the liquid under the vinyl it is going on top of the film when wrapping your vehicle. The liquid acts as a lubricant and lets the squeegee slide smoothly across the chrome or other sensitive vinyl film and minimizes or even eliminates the scratches that often occur during installation.

By spraying the soapy water solution directly onto the soft side (felt or microfiber) of the squeegee then using this squeegee to apply the chrome vinyl film on the surface of your vehicle.  Always being careful not to get the glue (underside of vinyl) wet, because that will ruin the vinyl film’s adhesion.

Once the vinyl film is applied to your vehicle, you simply dry off the panel and then inspect for scratches.  Very small scratches can most likely be removed using some heat from a heat gun, or they will go away eventually once the vehicle is out in the sun.

I hope this helps and that you will be able to use this technique on your next installation of CWS Chrome, Supercast, Satin Chrome or Space Pearl Gloss vinyls.

 
 
Free website - Webbyt